PetTech Remote Controlled Dog Training Collar, Rechargeable and Waterproof, All Size Dogs (10Lbs – 100Lbs), 400 Yard Range
Dog shock collar by pet-tech – the ultimate canine training collar product troubleshooting: Ensure that your collar is turned on. The collar ought to be flashing red. If the collar is not flashing red, you can gently shake the device to immediately bring it from sleep mode, or push the reset button with the included pin. The collar is fitted with a motion sensor that turns on the gadget when movement is found – you can hear the movement sensor rattling inside the collar. 1) Press the reset hole on the collar receiver with the consisted of pin, or something small like a paper clip. A beep will sound, and the showing light will switch on. 2) Immediately push the y button on the front of the remote transmitter (the right hand button) once and the receiver collar will beep showing the 2 gadgets have actually been combined, and the indicating light will turn off. Note you have to press the y button to pair the device within 10 seconds of the 1st beep for combining to be finished. If the gadget does not combine successfully, press the rest button with the consisted of pin and try again. Test your gadget to make sure it deals with each mode. When screening vibrate or shock modes, make sure that the level setting is set to a minimum of level 1. Note the default is 0 and has to be transferred to 1 otherwise you will not feel any vibration or shock. Combining an extra collar likewise, if you pair the remote & receiver on channel 1, it will just work when the remote is set to carry 1. To pair channel 2, change you remote to channel 2 and duplicate the steps above to match a second collar.
- Product Dimensions: 7.5 x 5.9 x 1.8 inches ; 9.6 ounces
- Shipping Weight: 9.6 ounces
- ASIN: B01DUWWZ9S
- UPC: 646437860536
- Item model number: 57